|
|
 |
|
150i 150W Stereo Integrated Amplifier
The 150i is a compact integrated amplifier with big attitude. It has been designed with precision engineering using the latest in technological advances to ensure seamless integration into any system. The 150i won't disappoint.
|
|
|
| 150i Specs |
|
| Dimensions: |
|
| Width: |
426mm (16.8") |
| Depth: |
344mm (13.5") |
| Height: |
102mm (4.0") |
| Weight: |
17kg (37.4lb) |
| Amplifier: |
|
| Rated Power Output (per channel): |
150Wrms into 8Ω
300Wrms into 4Ω |
| Maximum Power Output (prior to clipping, per channel): |
190Wrms into 8
300Wrms into 4Ω |
| Total Harmonic Distortion + Noise |
0.001% @ 1kHz, 150W into 8Ω |
| Typically: |
|
| 20Hz to 20kHz: |
less than 0.020%, 150W into 8Ω |
| 20Hz to 20kHz: |
less than 0.010%, 1W into 8Ω |
| Frequency Response |
|
| 20Hz to 20kHz: |
+0.00dB, -0.15dB |
| 5Hz to 60kHz: |
+0.00dB, -0.50dB |
| Damping Factor: |
800 @ 1kHz, 150W into 8Ω |
| Signal to Noise Ratio (unweighted): |
better than 100dB, ref. 150W |
| Preamplifier: |
|
| Input Impedance |
|
| Unbalanced: |
12kΩ |
| Balanced: |
22kΩ |
| Input Overload |
|
| Unbalanced: |
8Vrms |
| Balanced: |
8Vrms |
| Volume Control Range: |
-95.5dB to +31.5dB |
| Volume Control Resolution: |
0.5dB per step |
| Input Volume Trim Range: |
±40dB |
| Balance Resolution: |
0.5dB |
| Balance Range: |
±40dB |
|
|
|
éloquence DAC Module Specifications
| |
|
| Digital Inputs: |
2 SPDIF Coax (BNC)
2 SPDIF Optical (Toslink)
1 USB (Type B) |
| Input Sample Rate: |
32, 44.1, 48, 88.2, 96, 176.4, 192kHz (Coax, Optical)
32, 44.1, 48kHz (USB) |
| Input Word Length (maximum): |
24-bit (Coax, Optical)
16-bit (USB) |
| Input Impedance: |
75Ω (Coax) |
| Transformer Coupled |
|
| Coax: |
Yes |
| Optical: |
No |
| USB: |
No |
| Analogue Section |
|
| Digital to Analogue Conversion: |
24-bit / 192kHz |
| Output Voltage: |
2.0Vrms @ 0dBFS |
| Frequency Response |
|
| 20Hz to 20kHz: |
+0.0dB, -0.1dB |
| 5Hz to 94kHz: |
+0.0dB, -3.0dB |
| Dynamic Range (unweighted): |
better than 115dB @ 0dBFS |
| Signal to Noise Ratio (unweighted): |
better than 115dB @ 0dBFS |
| Channel Separation: |
better than 110dB @ 0dBFS |
| Stop Band: |
105kHz |
| Stop Band Attenuation: |
125dB |
éloquence Phono Module Specifications
| |
|
| Input Impedance |
|
| Low Gain (MM): |
47kΩ |
| High Gain (MC): |
100Ω |
| Input Capacitance: |
22pF
|
| Gain |
|
| Low Gain (MM): |
40dB |
| High Gain (MC): |
60dB |
| Total Harmonic Distortion + Noise |
|
| Typically: |
0.002% @ 1kHz, low gain setting |
| 20Hz to 20kHz: |
less than 0.010%, low gain setting |
| RIAA Accuracy: |
±0.5dB, 20Hz-20kHz |
| Signal to Noise Ratio (unweighted): |
better than 85dB, low gain setting |
|
|
|
| General Features |
| - High Power Design |
| - High-current Custom Power Supply |
| - High Damping Factor |
| - Advanced Microprocessor Control |
| - Advanced Stepped Volume Control |
| - Advanced Lossless Stepped Off-Set Balance Control |
| - Non-Invasive Protection |
| - Balanced (XLR) input |
| - Home Theatre/Pass-Through Loop |
| - IR (infrared) input and output |
| - Isolation Feet Options |
| User controles |
| - Interactive Menu System |
| - Infrared (IR) Remote Control |
| - Volume Up/Down |
| i/o Compliment |
| - 1 pair Balanced Inputs (XLR) |
| - 4 pairs Unbalanced Inputs (RCA) |
| - 1 pair Unbalanced Line Outputs (RCA) |
| - 1 pair Unbalanced Preamplifier Outputs (RCA) |
| - 2 pairs Binding Posts per channel |
| - 1 Trigger output (3.5mm jack) |
| - 1 External IR input (3.5mm jack) |
| - 1 IR output (3.5mm jack) |
| - 1 RS232 serial port (RJ45) |
| Optional Features* |
- Digital to Analogue Converter (DAC)
24bit/192khz upsampling allows high quality digital audio connections to be made. 2 x Coax, 2 x Optical (toslink) 1 x USB
|
- Phono (turntable) Input
Allowing both Moving Magnet (MM) and Moving Coil (MC) cartridge connection.
|
- High Quality Remote
Standard is a card type remote, but for the true connoisseur, a weighty, milled masterpiece remote is available.
|
|
|
|
|
éloquence Series